Studio 2 module reset
No speaker sounds, but headphones are working even when the PC Lyd channel is in the OFF position? Please have Ashley or Tine help you with this procedure.
Unplug power and reset Studio module 2
- Enter the technical room behind studio 2
- Locate the power cords for the studio 2 module (See below)
- Unplug both from the module
- Check the studio 2 mixer. Both screens should be black and all buttons including the Home button are off.
- Unplug the power cables from BOTH studio speakers on the desk. (back side of the speakers) DO NOT use their ON/OFF buttons!
- Return to the machine room and restore the power cables to the module.
- Return to the Studio. The mixer panels should now be fully illuminated and working.
- Activate the PC Lyd channel
- Play something via the Digas system (something from the Musikk catalog will be perfect, as it will play for at least 3-4 minutes)
- Confirm that there is sound from the Headphones first. Then;
- Reconnect the power cords to the speakers.
- Confirm that sound is working on the speakers. The music that is playing should be audible.
- Are the speakers making a loud "hisssssss" noise? Unplug it again. Wait 15 seconds then reconnect to power