Studio 2 sending quick setup

Setup a connected studio sending using Studio 2 as a production control room and Studio 1 will be ON AIR. Trained studio users ONLY

Journalen Redaksjon

Publisert: 07.02.2025 / Oppdatert: 23.02.2025 21:43

A complete guide to preparing, setting up and running a sending is coming soon.

Before you start

TURN OFF all microphones in Studio 1

This will avoid problems with ON AIR lights refusing to turn on or off

TURN OFF all web browsers on the Studio 2 PC

This will prevent unexpected sounds interrupting your sending

On the Studio 2 mixer panel, press the Connect button. (Studio 1 mixer will go dark and lock out)

You will need to load the Studio1 microphones onto the mixer.
Press the Snapshot button (in the Pages section, see below)

Select Sending layout. (1.)

Press the white "upload" button (2.) to activate the new layout. Press the Snapshot or Home button to exit the menu.
Turn ON all Digas channels and set the PC Lyd channel to OFF, PFL button ON (See below)
*See the PC Lyd channel options section for more details

Mixer right sending layout — **Digas** channels ON. **PC Lyd** OFF, **PFL** ON. **Connect** button activated. Microphone layout for sending loaded.

Microphone layout for studio 2 sending — Microphone layout for Studio 2 control room sendinger. Loaded from the Snapshot function.

The studios are connected and ready for a sending.

OBS! When you are finished;

-Disconnect from Studio 1

-Reset the microphone layout to Studio 2

Press the Connect button to disconnect from Studio 1
Press the Snapshot button (in the Pages area)
Press the Studio2 layout button. It will now be coloured green.

Press the white "upload" button to activate and reset the Studio2 microphones.
Press the Snapshot or Home button to exit the menu.

*PC Lyd channel options

The PC Lyd channel is used for playback of all sounds generated from the Studio 2 PC (media players, web browsers, music players, osv.) It is also tasked with Pre-Fade Listening (PFL) an audio preview function of any sound object in Turboplayer. You cannot have both of these functions.

IF you wish to use the PFL function to preview sounds via Turboplayer during the sending, the PC Lyd channel must be set to OFF and its PFL set to ON as shown. Preview sounds will be played via the internal speaker on the mixer and the "Cue" dial allows you adjust the playback volume for those previews.